Emergency Light

Emergency lighting (Emergency Light).

Emergency lighting (Emergency Light).

The purpose for the use of emergency lights work is used as lighting tools in case of power failure. By machine.

Lighting is to provide agencies with the lighting at night.

The principle of operation of the fire emergency is.

Is a device that stores electrical energy in batteries which the battery there will be a 2 is a water type.

Refined and distilled water does not dry-type and when the battery power level using the Contact page On.

Of the Relay and will make the bulbs lit when there is power supply, emergency lights, the voltage reduction circuit.

DC current output, and to charge the battery, and Off-page Concat circuit relay to.

Do not let the bulb light

The step is correct.

Before using it.

-Should research each brand manual, understood.

-Emergency lighting installations should observe their emergency lights battery type, such as if the battery.

The fill distilled water should be installed in walkways, or at the area or areas where ventilation is.

Well, because of all the time that the battery charge lead evaporate.

Harmful to respiratory system if it is installed in a room where there is not enough air. In a room where there

Air is not good, or the system is shut down to install emergency lights battery pack dry type.

During use.

-If the battery is a more distilled water distilled water level must be checked every 1 month.

-Test applications that can work as usual by pressing the test every month whether or not to stick lamp. If the test button does not exist as a model, unplug the power.

-If the power outage in the daytime, and then one has to switch off light bulb when the electricity supply is normally open switch, because otherwise. Emergency light battery will not charge.

-The battery should have ran out of battery time to lengthen the service life of the battery by opening the. Keep the machine about 6 months at a time.

Maintenance emergency light

-Clean the sun lamp every 2 weeks.

-Check the level of distilled water Fill distilled water every 1 month

-Test the functionality of the test apparatus every 1 month.

-Spit out every 6 months, the battery charge.

Selection of electrical equipment, emergency lighting, emergency lighting, lighting.

By selecting the duration (Duration) The number of hours. The number of emergency lighting that uses a type of emergency lighting, emergency lighting is the neck, Ignatius halogen lamp (Halogen Dichroic) and emergency light bulb Tang saten. Halogen (Tungsten Halogen) or led (LED)

Electrical equipment maintenance, emergency lighting, emergency lighting, emergency lighting.

Division engineer or administrator, emergency lighting. There must be a monitoring system and emergency lighting works. Every month, by means of the following tests.

1. testing the emergency lighting, emergency lighting TEST switch or by pressing the emergency lamp attached to emergency electrical appliance must be lit. Release the switch, emergency lighting, fire apparatus connected to it will be level.

2. unplug the lamp, contingency or emergency lighting. Emergency light bulb attached to emergency electrical appliance must be lit and left behind about 30 minutes after the test, plug in your lights, emergency lighting. Into the same outlet the electricity into the battery of emergency lighting.

Why the need to test the system, emergency lighting, emergency lighting, or every month.

1. a battery of emergency lights or emergency lights will have to evolve a charge and electricity in order to prevent the deterioration of the internal battery pack it with chemicals or a short circuit of the battery cells, emergency lighting. In effect, battery deterioration and expire faster.

2. test the operation of emergency lighting equipment. Emergency lights that were working as normal? If the work is not normal, rush says the company's Service Department.

Caution in the use of emergency lights.

1. do not install emergency lights battery pack type, distilled water is filled with bad air because it will lead to rayekrachai in the air is harmful to respiratory system.

2. installation of emergency lights must be stable, strong, because the battery has probably fallen into danger.

3. power should be plugged in to charge, the battery is full. Available at all times when the normal power level.

The article emergency lighting/emergency lighting sign

Emergency lighting (Emergency Light).

The purpose for the use of emergency lights work is used as lighting tools in case of power failure. By machine.

Lighting is to provide agencies with the lighting at night.

The principle of operation of the fire emergency is.

Is a device that stores electrical energy in batteries which the battery there will be a 2 is a water type.

Refined and distilled water does not dry-type and when the battery power level using the Contact page On.

Of the Relay and will make the bulbs lit when there is power supply, emergency lights, the voltage reduction circuit.

DC current output, and to charge the battery, and Off-page Concat circuit relay to.

Do not let the bulb light

The step is correct.

Before using it.

-Should research each brand manual, understood.

-Emergency lighting installations should observe their emergency lights battery type, such as if the battery.

The fill distilled water should be installed in walkways, or at the area or areas where ventilation is.

Well, because of all the time that the battery charge lead evaporate.

Harmful to respiratory system if it is installed in a room where there is not enough air. In a room where there

Air is not good, or the system is shut down to install emergency lights battery pack dry type.

During use.

-If the battery is a more distilled water distilled water level must be checked every 1 month.

-Test applications that can work as usual by pressing the test every month whether or not to stick lamp. If the test button does not exist as a model, unplug the power.

-If the power outage in the daytime, and then one has to switch off light bulb when the electricity supply is normal.